22 Series Affordlefine
Two component epoxy ink, specially designed to employ on flamed polyethilene and polypropilene bottles with high speed machines.
The dried film of 22 SERIES is flexible and hard, with an outstanding adhesion. Its chemical resistance is also outstanding..
Two component epoxy ink, specially designed to employ on flamed polyethilene and polypropilene bottles with high speed machines.
The dried film of 22 SERIES is flexible and hard, with an outstanding adhesion. Its chemical resistance is also outstanding.
- 22 Series dries to a tough, flexible film
- Outstanding adhesion
- High chemical resistance
- Gloss Finish
- Special colours are available on demand
For Polyethylene treated bottles, Polypropylene treated bottles. For flame or corona-treated polyethylene and polypropylene bottles and containers.
D-100 as fast and D-400 as normal to slow.
Its adequate mixture gives a good behaviour in the inking unit. When dried to the air, it dries in a few minutes if the temperature of the factory is above 20ºC and there is good ventilation. When dried by oven, at 80ºC, it dries in about 2-3 minutes. In any case, ovening is very important to assure a good polymerization.
Emulsion with ARGAZOL-E (easy decoating)
or ARGAZOL-UV (high performance and definition)
with meshes from 90 to 140 meshes/
cm.
Add to the ink HARDENER-122 at 10-15%, or HARDENER-118 from 7 to 14%; the former dries faster and provides better chemical resistance.