55 Series Propiscreen
One component ink for screen printing on sheets and injected pieces of polypropylene, usually without need of flaming. It allows decorating items that, due to their characteristics, such as very thin walls or very big dimensions, etc., flaming makes them loosing important attributes such as dimensional stability in industrial pieces or gloss in decorative pieces.
One component ink for screen printing on sheets and injected pieces of polypropylene, usually without need of flaming. It allows decorating items that, due to their characteristics, such as very thin walls or very big dimensions, etc., flaming makes them loosing important attributes such as dimensional stability in industrial pieces or gloss in decorative pieces.
- 55 SERIES
- Not flaming saves gas, the flaming unit and its maintenance, the handling and deterioration of the item and room, so the cycle investment/redemption.
- Finish: Gloss.
- Presentation: Only viscosity needs to be adjusted, depending on
the job, factory temperature and impression speed.
Two component ink, specially suitable for the impression on “hard substrates”, such as metals, glass, ceramics, polyamides, inyected polyesters, armed polyesters, treated polyethylene and polypropylene, woods, epoxy-powder paints, enamels, etc.
D-400 as normal and D-700 as slow. Its adequate mixture gives a good behaviour in the screen and short drying times in the order of 10 to 20 minutes when dried to the air, and seconds at 60ºC, temperature which must not be exceeded.
Emulsion with ARGAZOL-E (easy decoating) or ARGAZOL-UV (high performance and definition) with meshes from 90 to 130 meshes/cm.