54 Series PropiPad
One component ink for pad printing on injected or blowed pieces of polypropylene, usually without need of flaming. It allows decorating items that, due to their characteristics, such as very thin walls or very big dimensions, etc., flaming makes them loosing important attributes such as dimensional stability in industrial pieces or gloss in decorative pieces.
Description
Features
Applications
Diluents
One component ink for pad printing on injected or blowed pieces of polypropylene, usually without need of flaming. It allows decorating items that, due to their characteristics, such as very thin walls or very big dimensions, etc., flaming makes them loosing important attribut
- 54 SERIES has a gloss finish, good resistance to abrasion, to water and to
detergents. - Not flaming saves gas, the flaming unit and its maintenance, the handling and
deterioration of the item and room, so the cycle investment/redemption. - Finish: Gloss.
- Presentation: Only viscosity needs to be adjusted, depending on
the job, factory temperature and impression speed.
Injected/blowed pieces of polypropylene.
D-100 as normal and D-400 as slow. Its adequate mixture gives a good behaviour in the duct and short drying times in the order of 10 to 20 minutes when dried to the air, and seconds at 60ºC, temperature which must not be exceeded.